Home > Products > Lathe > CNC Lathe >

End Face Milling and Center Hole Drilling Machine Tool

End Face Milling and Center Hole Drilling Machine Tool

End Face Milling and Center Hole Drilling Machine Tool
End Face Milling and Center Hole Drilling Machine ToolEnd Face Milling and Center Hole Drilling Machine ToolEnd Face Milling and Center Hole Drilling Machine ToolEnd Face Milling and Center Hole Drilling Machine ToolEnd Face Milling and Center Hole Drilling Machine Tool
CategoriesCNC Lathe
AlbumView larger image
BrandDRC
ModelJX-Z
FOB portHangzhou
Terms of PaymentL/C, T/T
Update Time2018-08-22
Detail Information
DRC JX-Z500 Small Sized Flat Bed End Face Milling and Center Hole Drilling Machine Tool have China's first independent research and development axis intelligent control system. For end face of shaft, JX-Z can be one-time complete processing include,milling, drilling center hole, turning the outer circle, scratching the center hole and other functions. 

Single spindle milling with high steel, bearing three after the first twoInternational strong steel standard structure, servo spindle motor drive.

Design of double main shaft box with high rigidity, servo spindle motor drive.

Fully enclosed protection, oil and electricity water completely block isolation, structural requirements.Design humanization, smooth chip removal.

Super long slide, effectively improve the processing performance and service life.
Item

JX-Z500

JX-Z680

JX-Z800

Unit

Remark

Processing Diameter Range

Ф14-70

(Alterable)

Ф14-70

(Alterable)

Ф20-80

(Alterable)

mm

Processing Length Range

70-500

(Alterable)

195-680

(Alterable)

300-800

(Alterable)

mm

Center Hole Model Specifications

A/B/C/R  TYPE

Ф≥2.5

Maximum Single-Sided Milling Cutting

5

mm

Standard Round Steel 

Spindle Rpm Range

0-2000

r/min

Optional configuration

Machine Tool Control Mode

Juxin system/GSK CNC/Siemens/FANUC/Other CNC system

X/Y/Z-Axie Repeated Locating Precision 

0.006

mm


Consistency Of The Milling Cutting Length At Both Ends

±0.05

mm

Special Requirement ±0.02

Consistency Of The Center Hole Depth

±0.05

mm

Special Requirement ±0.02

Verticality Of Center Hole

0.03

mm

Ф50mm End Face

Roughness Of The Center Hole

Ra 1.6

mm

Machine Overall Dimensions

2.4*1.31*1.7
2.8*1.31*1.7
2.8*1.31*1.7
m

Machine Total Power

15

Kw

Machine Total Power

2.5

T
Please send your message to us
*We will reply your inquiry to this Email as soon as we see it