Home > Products > Lathe > Conventional Lathe >

CW61100E Heavy Duty Ball Screw Manual Lathe

CW61100E Heavy Duty Ball Screw Manual Lathe

CW61100E Heavy Duty Ball Screw Manual Lathe
CW61100E Heavy Duty Ball Screw Manual LatheCW61100E Heavy Duty Ball Screw Manual LatheCW61100E Heavy Duty Ball Screw Manual LatheCW61100E Heavy Duty Ball Screw Manual LatheCW61100E Heavy Duty Ball Screw Manual Lathe
CategoriesConventional Lathe
AlbumView larger image
BrandDRC
ModelCW61100E
Terms of PaymentL/C, T/T
Update Time2018-08-21
Detail Information

What Is DRC's CW series Conventional Lathe ?

CW series conventional lathe

 

CW series conventional lathes is mature, and this series lathes have the following characters, such as big power, rigidity, spindle speed range, apply force or speed cutting, can be completed on a variety of shaft and disc-type parts of the external cylindrical surface, conical surface , grooving, chamfering, drilling and tapping machining processes, and can processes metric thread, inch thread, modulus thread, thread pitch and taper thread, the knife can cut short cone vehicle longitudinal feed and feed on the turret motor complex exercise can cut the long cone, excellent for large complex parts and can show superiority.

What Is The Application Field of CW series Conventional Lathe?

CW lathe.jpg

 ( More Detailed Picture of CW series Lathe Machine )

1.According to the different needs of the user configuration, there are metric, imperial, and other types of public bilingual.
2. Spindle box with mechanical friction disc clutch, without changing the motor speed and stop the motor can be realized spindle speed, stop, change direction.
3.machine apron with fast-moving device, with overload protection device; vertical and horizontal cross bar handle, opening and closing nut handle.
Without changing hanging round, you can turning metric, inch, module, thread pitch.
4. metric available tools, Inch machine, the left wheel apron and many other combinations;
5.Head stock with clutch

6. machine tool spindle head in the form of C6;
7. Headstock machine, feed box with oil pump lubrication;

8.Apron with rapid traverse control.

What Is The Details Of CW series Conventional Lathe?

CW series conventional lathe

1.High rigid structure design

This machine adopts the traditional horizontal lathe layout, the whole design, rigid, meets the safety standard. The main basic parts of bed and head of the bed are all cast in resin sand, the artificial aging treatment and the stability of the whole machine are superior. The bed body adopts HT300 material, the guide rail of the bed surface of the lathe is quenched by high frequency, the guide rail is G50, and the guide track life is improved.

2.High efficiency and multipurpose design

It can complete the external cylindrical surface of shaft and disc type parts, taper and grooving, chamfering, cutting drilling and tapping, and can process the commonly used metric thread, thread pitch modulus (special thread to consult), the knife frame can be cut short for motor vehicles the composite motion cone, vertical turret into the feed can cut a long cone of motor vehicle.

3.High rigidity spindle

The head stock machine control handle with centralized control, easy operation, the spindle system supported by three point, and the bearing of high precision, strong rigidity, brake axis and the positive and negative changes to the hydraulic control, sensitive and reliable braking, can transform a button to stop the speed, the bed head box with forced lubricating oil pressure, the head stock has beautiful appearance, good rigidity, high precision, stable operation, low noise, easy assembly, small deformation characteristics of spindle thermal.

4.Fast crossbar drive

The slide box of the machine is equipped with a fast moving device, which can quickly move to the desired position.

5.The tail seat with motor drive and high stiffness tail socket

The machine tool is equipped with the motor drive device, especially the larger length specification, which reduces the labor intensity and provides the working efficiency.

6.Chip cooling system

In order to ensure the clean of the site, there are dandruff plates in the lower part of the bed to ensure that the chip is removed from the processing zone. The independent cooling system is equipped with large flow cooling pumps to provide mandatory cooling for turning processing. 

Send Inquiry Here to Get a Free Work-piece Sample!

What Is The Specifications Of CW series Conventional Lathe?

ItemCW61100ECW62100E
Max.swing over bed1000mm
Max.swing over carriage720mm
Center distance750mm 1000mm 1500mm 2000mm 3000mm 4000mm 5000mm 6000mm
Width of gap320mm
Swing over gap1230mm
Width of guide way550mm
Spindle bore diameter100/105/130mm
Spindle speed(64)0.1-24.3mm/r
Longitudinal feed(64)0.1-24.3mm/r
Cross feed(64)0.05-12.15mm/r
Rapid traverse speed3.8m/min
Metric thread(39)1-240mm
Max. travel of vrpss slide493mm
Travel of top slide200mm
Main motor Power11kw
Rapid reaverse motor power1.1kw
Coolant pump motor power0.09kw
Send Inquiry Here to Get a Free Work-piece Sample!
www.drcmachine.com

Send Inquiry Below to Get a Free Work-piece Sample!


Please send your message to us
*We will reply your inquiry to this Email as soon as we see it