Home > Products > Lathe > Conventional Lathe >

manufacturer DRC CQ6280 high precision metal bench lathe light duty lathe machine for making threads

manufacturer DRC CQ6280 high precision metal bench lathe light duty lathe machine for making threads

manufacturer DRC CQ6280 high precision metal bench lathe light duty lathe machine for making threads
manufacturer DRC CQ6280 high precision metal bench lathe light duty lathe machine for making threadsmanufacturer DRC CQ6280 high precision metal bench lathe light duty lathe machine for making threadsmanufacturer DRC CQ6280 high precision metal bench lathe light duty lathe machine for making threads
CategoriesConventional Lathe
AlbumView larger image
BrandDRC
ModelCQ6280
Swing Over Slide:660mm lathe machine
Center Height:330mm metal bench lathe
Max. Travel of Cross Slide:420mm horizontal lathe
Dimension(L*W*H):1500mm/2000mm/3000mm
Swing Over Cross Slide:570mm high speed: low cost
Max. Travel of Compound Rest:230mm Ordinary horizontal lathe
Swing in Gap Diameter:1035mm metal lathe
Width of Bed:400mm lathe
Main motor power:7.5kW(10HP) engine lathe
Max. Swing Diameter:400mm high precision metal bench lathe
FOB portdalian
Terms of PaymentL/C, T/T
Update Time2018-12-17
Detail Information

manufacturer DRC CQ6280  high precision metal bench lathe light duty lathe machine for making threads

   lathe /www.drcmachine.com

C series conventional lathes is mature, and this series lathes have the following characters, such as big power, rigidity, spindle speed range, apply force or speed cutting, can be completed on a variety of shaft and disc-type parts of the external cylindrical surface, conical surface , grooving, chamfering, drilling and tapping machining processes, and can processes metric thread, inch thread, modulus thread, thread pitch and taper thread, the knife can cut short cone vehicle longitudinal feed and feed on the turret motor complex exercise can cut the long cone, excellent for large complex parts and can show superiority.
Standard accessories:Three-jaw chucka and adapter, sleeve and center, Oil gun
Special attachment:Four-jaw chuck, face plates, Drawing, Center frame, With the knife holder, Quick change tool holder,foot brake, coolat, Car taper attachment

  lathe machine  /www.drcmachine.com

The main performance characteristics:
1 Machine tool head box and bed, tailstock, Supporting plate, etc. the combination of surface between manual scraping, machine to undergo a rigorous inspection, effectively ensure the machine tool accuracy and stability.
2 Machine adopts high strength cast iron, copper and chromium special materials are added, the bed width 400mm, bed rail quenching depth up to 4mm, effectively improves the agreeability and stability of the machine.
3 The machine tool bed head box lubrication uses the pump to carry on the circulation forced lubrication, in view of the south hot weather, has guaranteed the bed head box cleanliness and the heat radiation characteristic, has effectively extended the bearing and gear's service life.
4 Wafangdian Bearing is used in machine tool spindle, the spindle through hole diameter 105mm, machine tool gear with precision grinding, can effectively improve the hardness of the gears, to reduce noise of the machine.
5 Machine tool uses the domestic brand lead screw, the silk mother uses the high quality bronze alloy to guarantee the wear-resisting property and the precision maintenance.
6 The machine adopts high strength four station turret shank size: 25x25mm.

Application:
1 Cseries ordinary horizontal lathe is used to turning internal and external cylindrical surface, conical surface, and other rotating surface, turning various metric and inch, modulus and pitch thread, and the pitch diameter of the thread and pull the drilling and oil tank etc., is general very strong horizontal lathe, Widely applicable batch processing of various shaft and disc parts.
2 The series lathe bed width in general lathe, 400mm rail width has higher stiffness, rail surface by intermediate frequency quenching, wear-resistant durable.
3 Handy machine operator concentration, slide plate is provided with a quick moving mechanism. Using single handle operation, humanization.
4 The rigidity of the machine tool structure and the transmission stiffness are higher than the general lathe, the power utilization rate is high, which is suitable for the strong cutting.
5 Before leaving the machine tool factory, the machine tool is tested strictly according to the inspection procedure, and the machine tool is tested to ensure that the machine tool has good stability and reliability.

lathe /www.drcmachine.com

1.High rigid structure design

This machine adopts the traditional horizontal lathe layout, the whole design, rigid, meets the safety standard. The main basic parts of bed and head of the bed are all cast in resin sand, the artificial aging treatment and the stability of the whole machine are superior. The bed body adopts HT300 material, the guide rail of the bed surface of the lathe is quenched by high frequency, the guide rail is G50, and the guide track life is improved.

2.High efficiency and multipurpose design

It can complete the external cylindrical surface of shaft and disc type parts, taper and grooving, chamfering, cutting drilling and tapping, and can process the commonly used metric thread, thread pitch modulus (special thread to consult), the knife frame can be cut short for motor vehicles the composite motion cone, vertical turret into the feed can cut a long cone of motor vehicle.

3.High rigidity spindle

The head stock machine control handle with centralized control, easy operation, the spindle system supported by three point, and the bearing of high precision, strong rigidity, brake axis and the positive and negative changes to the hydraulic control, sensitive and reliable braking, can transform a button to stop the speed, the bed head box with forced lubricating oil pressure, the head stock has beautiful appearance, good rigidity, high precision, stable operation, low noise, easy assembly, small deformation characteristics of spindle thermal.

4.Fast crossbar drive

The slide box of the machine is equipped with a fast moving device, which can quickly move to the desired position.

5.The tail seat with motor drive and high stiffness tail socket

The machine tool is equipped with the motor drive device, especially the larger length specification, which reduces the labor intensity and provides the working efficiency.

6.Chip cooling system

In order to ensure the clean of the site, there are dandruff plates in the lower part of the bed to ensure that the chip is removed from the processing zone. The independent cooling system is equipped with large flow cooling pumps to provide mandatory cooling for turning processing. 

Our customer

 

lathe Machine /www.drcmachine.com

What Is The Specifications Of C series Conventional Lathe?

 C6266ACQ6280 

Swing Over Slide

660mm  

Swing Over Cross Slide

440mm570mm 

Swing in Gap Diameter

900mm1035mm 

Length of Gap

 250mm 

Center Height

 330mm 

Distance Between Centers

1500mm/2000mm/3000mm 

Width of Bed

 400mm 

Max. Section of Tool

25mm × 25mm 

Max. Travel of Cross Slide

368mm420mm 

Max. Travel of Compound Rest

230mm 

Spindle Bore

105mm 

Spindle Nose

D1-8 

Taper of Spindle Bore

 Φ113mm(1:20)/MT5 

Spindle Speed Number

16 

Range of Spindle Speed

25~1600rpm 

Leadscrew Pitch

 Φ40mm×2T.P.I. or Φ40mm×12mmΦ 

Inch Threads Range

 7/16~80T.P.I. (54 kinds) 

Metric Threads Range

  0.45~120mm (54 kinds) 

Diametrical Pitches Range

  7/8~160DP (42 kinds) 

Module Pitches Range

0.25~60MP (46 kinds) 
Longitudinal Feeds Range in Metric Lead Screw 0.044~1.48mm/rev (25 kinds) 
Longitudinal Feeds Range in Inch Lead Screw   0.00165"~0.05497"/rev (25 kinds) 
Cross Feeds Range in Metric Lead Screw 0.022~0.74mm/rev (25 kinds) 
Cross Feeds Range in Inch Lead Screw 0.00083"~0.02774"/rev (25 kinds) 
Quill travel 235mm 
Quill diameterΦ90mm 
Quill taperMT5 
Main motor power7.5kW(10HP) 
Coolant pump power0.09kW (1/8HP) 

Overall Dimension (L×W×H)

321/371/471cm×123cm×160cm321/371/471cm×123cm×167cm 

Packing Size (L×W×H)

324/374/474cm×114cm×184cm324/374/474cm×114cm×191cm 

Net Weight

3060/3345/3710kg3220/3505/3870kg 

Gross Weight

3535/3835/4310kg3705/4005/4480kg 


Please send your message to us
*We will reply your inquiry to this Email as soon as we see it