DRC GB4228-1 multifunction High Double Column Horizontal band saw cutting machine for large Steel metal plate
The machine is used to cut the large steel, which is not more than 280mm, the width is less than 280mm, and can be used to cut all kinds of ferrous or non-ferrous materials after selecting the appropriate technological parameters.
What Is DRC's GB series Bandsaw Machine?
Full automatic band saw machine
1. Double column struture.
2. Double oil cylinder clamping method using micro motion oil cylinder and clamping oil dylinder.
3. The intelligent man-machine interface makes the machine operation is very simple and effective, and the abnormal signal of the machine and the trouble shooting of the machine are displayed automatically.
4. The high efficiency and energy saving controller is used to design the simple the simple circuit board and the space of the electric box, which not only ensures the low failure rate of the machine, but also is convenient for maintenance and save space.
5. The precision grating is used to control the feeding precision.
6. Configuring small material beam forming device.
7. 20 sets of sawing parameters can be set at a time.
8. According to the requirement, the hydraulic tension and frequency conversion stepless speed regulation of the saw belt can be customized.
9. With stroke switch control, hydraulic automatic feeding.
food band saw
horizontal band saw
meat band saw
mini band saw
auto feed band saw
wood band saw
portable band saw
1. The machine is equipped with automatic clamping, automatic feed and cutting saw frame automatic quick rise (that is, return knife) through mechanical, electrical and hydraulic cooperation.
2. Feed speed, within a given range, can be adjusted without grade.
3. Due to the cutting tool, using imported chip of double metal band saw blade, therefore, narrow incision, material consumption, the power is small, is a large and medium-sized enterprises, public institutions cutting large steel embryo, a kind of large steel embryo with saving material and energy saving high efficient cutting tool.
4. Reinforced adjustable tungsten steel clip to ensure the cutting precision.
5.Saw frame travels across solid dual-column guides
6.Rigid, adjustable saw blade guides prevent lateral escape of the saw blade and ensure maximum angular accuracy
7.Ideally positioned control panel within comfortable reach on top of the saw frame
8.At the end of each sawing cycle, the saw blade frame will automatically return to the home position
9.Tthrottle valve allows infinitely variable saw frame feed
10.Two cutting speeds for a wide spectrum of materials and workpiece diameters
11.Manually adjustable workpiece clamping and linear stop
The main performance characteristics OF Double Column Metal Sawing Machine Semi Auto Metal Cutting Machine Stainless Steel Pipe Cutting Band Saw Machine:
-- International famous brand components get precise measurement of tolerance..Length error < 0.15 mm
Feeding speed error < 0.10 mm..-- More working efficiency:
Automatic band sawing machine is suitable for sawing with large quantities of the same specifications, stable performance and high efficiency. It is 3 times replacement than ordinary sawing machine ‘s working efficiency...-- Alternative operation mode
Button type control panel, sawing mode change flexible, manual and automatic combination;..-- PLC control
PLC controller, complete automatic sawing process,..- Double upright column structure, high stability;..- Stepless regulation speed adjustment
What Is The Details Of GB series Bandsaw Machine?
1. The high efficiency and energy saving controller is used to design the simple the simple circuit board and the space of the electric box, which not only ensures the low failure rate of the machine, but also is convenient for maintenance and save space.
2. The precision grating is used to control the feeding precision.
3. Configuring small material beam forming device.
4. 20 sets of sawing parameters can be set at a time.
5. According to the requirement, the hydraulic tension and frequency conversion stepless speed regulation of the saw belt can be customized.
6. With stroke switch control, hydraulic automatic feeding.
Why Choose DRC?
Who Is DRC?
DRC is a group company ,which is professional in products and sales of advanced CNC machine tools . Acting full operation of the six machine tool production company's overseas sales.
DRC is located in Dalian, which is one of the largest seaport cities of China.Our products exported to Russia, Dubai, Hungary, Italy, Argentina, the Philippines, India, Iran, more than 50 countries.
DRC has six factories in China, which covers many kinds of mechanical equipment.
Boring and Milling Machine
Laser Cutting Machine
Dental Milling Machine
Glass Tempering Furnace
Special Machine for Pipe Threading ,Valve Milling, End Facing Machine and so on