Home > Products > Machining Center > Horizontal Machining Center >

Horizontal CNC Machining Center with FANUC Controller

Horizontal CNC Machining Center with FANUC Controller

Horizontal CNC Machining Center with FANUC Controller
Horizontal CNC Machining Center with FANUC ControllerHorizontal CNC Machining Center with FANUC ControllerHorizontal CNC Machining Center with FANUC ControllerHorizontal CNC Machining Center with FANUC ControllerHorizontal CNC Machining Center with FANUC Controller
CategoriesHorizontal Machining Center
AlbumView larger image
BrandDRC
ModelDHM1250T
Dimension(L*W*H):4470/5430/6450mm
Controlling Mode:Fanuc System
Spindle speed:6000/15000rpm
Accuracy of repeated posit:0.005mm
Spindle center to worktable surface:90-1350mm
Power(W):15KW
Weight:28000kg
Machine Type:Cnc Horizontal Machining Center
Positioning accuracy:0.01mm
X-axis travel:2500mm
Terms of PaymentT/T
Update Time2019-08-22
Detail Information
Product Description

New Horizontal CNC Machining Center with FANUC Controller For Sale

CNC horizontal machining center

DHM Owns Powerful Torque Force With Excellent Heavy Cutting Machining Capability.
Unique Gear Type Spindle:

DHM Horizontal CNC Machining Center Uses The Drect Drive Spindle. Straight Type Spindle Motor Spindle With Wide Area, Low Speed And Full Power Output, To Meet The Large Amount Of Cutting Conditions And Cutting DHM-63/80/100/80T/110T/1250T Adopts Gear Type Spindle Variable Speed Device. Gear Type Main Shaft Head Are Integraly Cast Molding,Has A Higher Rigidity Than The Average Combined Type Main Shaft Structure, Improves The Stability Of The Machine. Cutting Ability Have More And More High Accuracy. Spindle Using Large Oilers NN Bearing Ultra Precision, Utra Rigid, There Processing Capability For Heavy Cuttng.

Tool Magazine:
Automatic Toolchanger Is Composed Of Tool Magazine And Tool Changing Arms. Automatic Toolchanger Is Installed Separately From Machine Tool With The Purpose Of Preventing Adverse Influences Of Vibration During Running Of Automatic Toolchanger And Other Reason On Precision. Tool Selection Adopts The Method Of Fixed Address In The Shortest Path. All Tools Return To Original Position, Therefore, The Problem Of Collision Between Large-Size Tools Is Only Considered In Initial Installation. Two-Way Tool Ma Adopts The Shortest Path.

Machine Frame Structure Design Is Confirmed To Ensure High Rigidity:
The Structure Of The Machine Frame Is Been FEM Analyzed By ANSYS System To Guarantee High Stability Under High Speed And High Precision Machining. A Deformation Testing Is Simulated Under Lading Simulation To Ensure The Rigidity And Have Excellent Bending Resistance DHM Series Is Suitable For Heavy Cutting Horizontal Machining Center In Design Of X Axis Guide Rail With Large Span Section Difference, Make The Spindle And The Back Supporting Rail Distance Closer, In Order To Increase The Column Cutting Rigidity, And Fuly Meet Customer Demand Of Milling.
Double Work Table Form:

Horizontal CNC Machining Center Main Features

1.The X axis of the base is stepped type, the distance between the main shaft and the rear supporting rail is closer, and the stability of the machining accuracy is ensured; the column span is large, and the overall rigidity structure is more stable.

2.DHM  column thicker, other manufacturers thickness increased by 20%, more rigid.

3.DHM  base, Z shaft, support distance is wider, increase 40%, more rigid.

4.The DHM table has greater supporting surface and more rigid rigidity.

5.DHM  adopt the R55 linear roller guide rail, and the other manufacturers are R45or50. The wire rail is bigger, the rigidity structure and the bed precision are more stable.

6. DHM  screw are hollow oil cooling screw, to avoid the screw in the course of movement, resulting in a large amount of heat, resulting in poor screw accuracy.

Automatic tool touch probe
Because it can automatically detect the tool wear, damage degree and the offset value, can improve the operation convenience.

Chip removal
Through the center slot from the spindle is directly below the discharge cutting The shield makes the chip stacking, keep indoor clean processing.

Automatic workpiece probe
The apparatus(TOUCH SENSOR) and the contact between the workpiece coordnate signal, automatically set the basic coordinate system of workpiece machinng datum measurement after.

 Linear scale
Using lnear scale to improve the position precision, in order to machine high precision products.

 Process Details
Bed Body

The structure of the machine frame is been FEM analyzed by ANSYS system to gurantee high stability under high speed and high precision machining.A deformation testing is simulated under loading simulation to ensure the rigidity and have excellent bending resistance.

Spindle

DHM series uses the direct drive spindle. Srtaight type spindle motor spindle with wide area, low speed and full power output, to meet the large amount of cutting conditions and cutting.
Gear type main shaft head are integrally cast molding, has a higher rigidity than the average combined type main shaft strcuture, improves the stability of the machine.

ATC(Automatic Tool Changer)

Automatic toolchanger is composed of tool maagazine and tool changing arms.Automatic toolchanger is installed separately from machine tool with the purpose of preventing adverse influences of vibration during running of automatic toolchanger and other reasoons on precision. 

Processing Products

Related Products
Main Parameter
Name
Unit
DHM1250T
X-axis travel
mm
2500
Y-axis travel
mm
1200
Z-axis travel
mm
1300
Spindle center to worktable surface
mm
90-1350
Spindle nose to work center
mm
350-1650
Spindle taper
BT 50
Rotating speed of spindle(standard)
rpm/min
6000
Optional spindle 1
Gear transmission
Optional spindle 2
Direct transmission
Reference aperture
mm
Φ60 H7
Max.load on worktable
kg
5000
Number of worktables
1
Axial transmission mode
Direct transmission
Cutting speed
mm/min
1-7000
Rapid traverse speed X/Y/Z
m/min
2012/12/12
Capacity of tool magazine
40(30/60)
Max.tool length
mm
500
Max.tool diameter(no adjacent tools)
mm
Φ125/250
Tool handle size
BT50/CAT50/DIN50
Spindle drive motor
kW
FANUC 15/18.5
Max.torque of spindle
N·m
560/800
Locating precision of machine tool/full travel
mm
±0.01
Repetitive locating precision of machine tool/full travel
mm
±0.005
Tank capacity
L
315
Machine weight
kg
28000
Floor area
mm
5430/6450
Machine height
mm
4470
Please send your message to us
*Email
Tel
*Title
*Content

Agree to use terms of service